Burrgon Series

Burrgon 100:

  • This machine is suitable to deburr small parts such as small gears maximum diameter of 40 mm.

  • Parts with cross holes, both ferrous and non ferrous can be done. The process is controlled with a panel timer

Burrgon 100 P:

  • This machine is suitable to deburr small parts such as small gears maximum diameter of 40mm.

  • Parts with cross holes, both ferrous and non ferrous can be done.

  • The process is controlled with PLC with 7" touch screen HMI.

Burrgon 100 P V2:

  • This machine is suitable to deburr small parts such as small gears maximum diameter of 40mm.

  • Parts with cross holes, both ferrous and non ferrous can be done.

  • The process is controlled with PLC with 7" touch screen HMI.

Burrgon 300/500:

  • This machine suitable to deburr larger parts.

  • It has two workstations which can be controlled simultaneously or individually. Both ferrous and non ferrous can be done.

Burrgon -M

It is mechanical burr breaking machine. This is a preprocess further to which a secondary operation can be done to give an edge radius.

Process:

A slow high torqued rotation of the work piece while the tool is held at a right position. A loud breaking sound is heard when the burr breaks.

Posh-B

It is a surface polishing machine. Stainless steel of any grade can be uses.

Process: it is a cold ionic surface polishing machine. The chemical used is a salt based solution without the use of any acids. The solution works only ag 12 c temperature.

The parts to be polished are dipped in into the tank for a fixed cycle time.