Cartridge for Return Line Filter
Models : CRLF 04 10,CRLF 04 25, CRLF 05 10, CRLF 05 25, CRLF 06 10, CRLF 06 25, CRLF 08 10, CRLF 08 25, CRLF 10 10, CRLF 10 25,CRLF 12 25
- Download PDF
Flexible Drive Coupling
The Hydax Flexible Drive Coupling consists of two gear hubs engaging in a sleeve of high grade plastic material. has superior strength and a wide operating temperature range. The gears have crowned-tooth form which permit axial and angular misalignment. The couplings have undergone extensive testing under severe load conditions.
Water Filter Housing
The housing is made of Fiberglass Reinforced Plastic (FRP) and the housings have an internal lining. The inlet and outlet ports are located at the bottom cover and have BSP threading. The design provides for easy disassembling in order to clean and change the cartridge. The housings are suitable to accommodate double open ended (DOE) and ‘O’ Ring cartridge configurations.
Gauge Isolator Valve(Single Station)
The Gauge Isolator Valves protect the pressure gauge from damaging pressure surges, hydraulic shock and mechanical vibrations. The fluid is completely isolated from the gauge until the knob is pressed. By pressing the knob, the fluid is connected directly to the gauge port giving instant and accurate readings on the gauge. As the knob is released
Filler Breather Assembly
This is a combination unit for filtering air displacement from the reservoir and for straining oil while filling. Mounting options include Tank Top and Side Mounting. The displacement capacity is 250 LPM and 700 LPM and filtration is upto 40 microns. The air displacement from underneath the cap assembly improves performance. Power coated cap and nylon or nickel-chrome plated strainer body ensures corrosion resistance.
The Hydax In-line Filter model ILF is an all-cast construction and is made from superior grade castings.These filters are rated for working pressures upto 20 kg/cm and the filtration is of 25 or 10 microns.The maximum flow capacity is 600 LPM with fluid viscosity of 80 SSU at 40° C. The port connections range from 1BSP to 3 BSP” round flange
Double Pilot Check Valve
In a free flow direction through the inlet, the ball is unseated the flow is out of the cylinder port. When the control valve is centered, the load is locked.
Pressure Line Filter
Return Line Filter
The RLF series of low cost return line filters is intended for direct mounting on hydraulic reservoirs. The low profile coupled with high flow ratings, helps in mobile installations besides stationary applications like machine tools, plastic machinery, etc. It requires one inlet fitting and discharges directly into the reservoir
Fluid Level Gauge (SGR Series)
Hydax introduces a newly designed Fluid Level Gauge of robust construction, bigger size and ‘O’ Ring sealing made from aluminium and glass-filled nylon. These level gauges are easy to install. Supplied in ready assembled condition it needs drilling of 2 holes to instal the gauges. Surface on which it is being installed should be level and of smooth finish. Sizes available are 76mm, 127mm, 178mm, 254mm and 356mm between bolt centres. These Level Gauges also have the options of heat dial / thermometer temperature indicator.
Filler Breather Assembly (Nylon)
This assembly is a combination unit for filtering air displacement from the reservoir and straining oil while filling. It is for use with Hydraulic/Lubrication oil reservoir applications, including machine tools, mobile equipment, industrial machinery, construction, mining, marine and agricultural applications etc. Breather-filters are a must for hydraulic systems ensuring clean air and oil passing into the reservoir